|
DATA SHEET |
|
 |
DISPENSING GUNS |
Techcon Systems G Series Guns
Techcon Systems G series guns are designed to accommodate standard 1/10 gallon cartridges, such as Techcon's TS110C cartridge. Techcon also provides metal retainers that adapt the G Series handle assemblies for use with the smaller diameter TS25C (1 1/2 oz), TS60C (6 oz), TS80 (8 oz) or TS120C (12 oz) cartridges. A 20 oz. retainer is available to accommodate dispensing from the TS20C (20 oz.) cartridge. The 20 oz. retainer requires the use of an adapter.
| Part Number | Size | Type | Part Number | Size | Type |
| 100-2 | 1/10 Gallon | Plastic | 101-60R | 6 Ounce | Metal |
| 110-2 | 1/10 Gallon | Metal | 101-120R | 12 Ounce | Metal |
*101-20A Adapter required for 20 oz.
G-Series Handle Assemblies
Two G Series Handle Assemblies are available, the 100-1-10 Plastic Handle and the 110-1-10 Metal Handle. These handles may be paired with any G Series Retainer. It is recommended that the 20 oz. retainer and adapter be used only with the 110-1-10 Metal Handle. Both handles are shipped complete with a 10-foot air hose.
| Part Number | Size | Handle | Retainer | psi |
| G-100 | 1/10 Gallon | 100-1-10 | 100-2 | 60 psi |
| G-110 | 1/10 Gallon | 110-1-10 | 110-2 | 100 psi |
| G101-25 | 2 1/2 Ounce | 100-1-10 | 101-25R | 60 psi |
| G101-60 | 6 Ounce | 100-1-10 | 101-60R | 60 psi |
| G101-120 | 12 Ounce | 100-1-10 | 101-120R | 100 psi |
| G110-25 | 2 1/2 Ounce | 110-1-10 | 101-25R | 100 psi |
| G110-60 | 6 Ounce | 110-1-10 | 101-60R | 100 psi |
| G110-120 | 12 Ounce | 110-1-10 | 101-120R | 100 psi |
| G110-20 | 20 Ounce | 110-1-10 | 101-20R* | 100 psi |
G Series Retainer Caps
Techcon Systems G Series Retainer Caps provide a leak-proof connection between the dispense and G Series Retainers up to 65 psi.
| Part Number | Description |
| 918-000-036 | 1/10 Gallon Retainer Cap (includes hose assembly) |
| 101-20A | 20 ox. Cartridge Adapter (used with 918-000-036 Cap) |
| 918-110-0006 | 1/10 Gallon Cap Assembly (used with 25-2 threaded retainer) |
TS700 System Manual Syringe Gun
| Part Number | Description |
| TS705SG | 5cc Manual Syringe Gun (Rod included) |
| TS70500ROD | 5cc Manual Syringe Gun Replacement Push Rod |
| TS710G | 10cc Manual syringe Gun (Rod included) |
| TS1000ROD | 10cc Manual Syringe Gun Replacement Push Rod 705SG |
| TS730G | 30cc Manual Syringe Gun (Rod included) |
| TS73000ROD | 30cc Manual Syringe Gun Placement push Rod. |
Ashby Cross distributes and manufactures a wide range of meter, mix equipment. Contact us or visit our site, www.ashycross.com, for further information.
Ashby Cross Company
28 Parker Street, Newburyport, MA 01950
Phone: 978-463-0202 Fax: 978-463-0505
Back to Web Site | Back
to Data Sheet Index