 Molding & Casting Equipment
Processing 2-part resins in molding and casting requires equipment that will operate under backpressure, provide uniform continuous flow to the mold, be reliable and repeatable with very accurate ratio. Ashby Cross has manufactured a range of molding machines for over 30 years. Our experience in Resin Transfer Molding and casting resins provides you with the correct equipment for the application. Contact us for selection assistance.
|
 |
GP80 Bench Top Meter Mix System
GP80 Bench-top meter, mix, dispense system designed for open mold pouring of urethane materials. May be configured with air drying system to eliminate moisture related problems with the urethane. |
Download Brochure |
|
2500 Double Acting
The 2500 Double Acting piston meter, mix system provides accurate, repeatable, uniform flow to the mold. This results in a uniform flow resulting in greater uniformity in the finished product.
The 2500 Double Acting system is available with portable cart, remote or fixed dispense head as well as a wide range of feed tanks and pumps. The double-acting nature of this piston system provides accurate ratio of the two components along with highly reliable service.
|
Download Brochure |
 |
GPFR 1000
For open mold casting and molding the GPFR1000 gear metering system provides excellent ratio control and continuous flow to an open mold. The system is designed to process a wide range of urethane materials with on-board tanks or from drums. The system has adjustable ratio, variable flow control, a desiccant system for moisture control, along with remote no purge snuff-back dispense head.
|
Download Brochure |
|
DYNA-STAT® Dynamic Mix/Dispense Head
DYNA-STAT® is a variable speed, servo controlled, dynamic mix/dispense head with disposable mix chambers. This unit provides the high shear mixing needed for optically clear applications. It combines dynamic mixing with disposable mix chambers, eliminating the need for solvent flushing. Other valves available.
|
Download Brochure |
|
|
Applications...
Resin transfer molding, silicone molds, and casting urethane parts.
VIDEOS...
|
