 Filter End-Cap Molding Equipment
Like our customers, you can rely on our over 30 years of application experience to bring you the meter, mix, and dispense systems to meet your needs in filter end-cap molding. Our experience in building adhesive dispensing equipment for epoxy, silicone, urethane, acrylic, and other materials distinguishes Ashby Cross from the competition. The equipment is designed around both the adhesive to be processed and the application. With hundreds of adhesive chemistries on the market, specific application knowledge can be the difference between the success and failure of a project. Contact us for selection assistance.
|
 |
GP80 Bench Top Meter Mix System
GP80 Bench-top meter, mix, dispense system designed for open mold pouring of urethane materials. May be configured with air drying system to eliminate moisture related problems with the urethane. |
Download Brochure |
|
2500 Double Acting with Drive Assist
The 2500 Double Acting, piston, meter - mix system with Drive Assist is used for production potting where medium to high production throughput is needed. The system will process materials such as epoxy, urethane, and silicone with 1:1 to 20:1 ratio by volume either filled or unfilled. The in-line configuration of the metering cylinders allows processing materials with wide viscosity difference without affecting the accuracy of the ratio. Hardened cylinders and rotary valves along with wear-resistant seals provide prolonged life with abrasive materials..
|
Download Brochure
|
 |
The DYNA-STAT®, a dynamic mix/dispense head provides consistent, high-shear, high-speed mixing, particularly important in foam applications. Disposable mix chambers eliminate the need for costly solvent flush used in conventional dynamic mixing devices. Consistent foam cell generation is achieved by precisely controlling the mixer speed with the use of a servo controlled drive motor. In addition the use of the servo drive assures exact repeatability of process requirements.
In addition to foam many other applications such as difficult to mix urethane and optically clear dispensing can take advantage of this unique mix/dispense valve. Available on all Ashby Cross systems, the DYNA-STAT® may be retrofit to existing meter, mix, dispense machines. |
Download Brochure |
 |
GPFR 1000
For open mold casting and molding the GPFR1000 gear metering system provides excellent ratio control and continuous flow to an open mold. The system is designed to process a wide range of urethane materials with on-board tanks or from drums. The system has adjustable ratio, variable flow control, a desiccant system for moisture control, along with remote no purge snuff-back dispense head.
|
Download Brochure |
|
Applications...
Filter end caps for water filters, air filters, oil filters, foam parts and urethane dispensing.
VIDEOS...
|
